Auto Wall-Mount Adjustment (Sold Separately); Entering The Menu - Samsung 750 Serie Guide De L'utilisateur

Auto Wall-Mount Adjustment (Sold separately)

Once the auto wall mount is installed, your TV's position can be easily adjusted.
TV Rear Panel
EX-LINK Cable
(Not supplied)

Entering the menu

1.
Press the ▲, ▼, ◄ or ► button on your remote control.
The Wall Mount Adjustment screen is displayed.
➣
If the Wall Mount Adjustment screen is not displayed when clicking on
➣
a direction button while watching your TV, use the menu to display that
screen.
• Press the MENU button to display the menu. Press the ▲ or ▼ button to select
"Setup", then press the ENTER
• Press the ▲ or ▼ button to select "External Settings", then press the ENTER
button.
• Press the ▲ or ▼ button to select "Wall-Mount Adjustment", then press the
ENTER button.
Remembering the Position
2.
Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on the TV screen,
➣
the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to select "Yes",
➣
then press the ENTER
setting.
3.
Press the Blue button.
Press the ▲ and ▼ buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
To not save the current position, press the RETURN button.
➣
When selecting a save mode, you cannot use the Color buttons.
➣
4.
Press the ENTER
When Position1 is selected, the message "Current position saved as
➣
Position1" is displayed.
5.
Press the ENTER
The saved Position appears on the left side of the OSD.
➣
Moving to the remembered position
1.
Complete Step 1 of "Entering the menu".
2.
Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
You can move the wall mount to one of the 3 pre-set positions by pressing
➣
the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
If you adjust the position after moving to a pre-set position, the position display will disappear.
➣
For installation, refer to the Installation Manual provided with the wall mount.
➣
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
➣
installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
➣
materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet + or WISELINK Pro is operating.
➣
LN40A750R1F, LN46A750R1F and LN52A750R1F models are not compatible with the old electrically powered wall
➣
mount model (WMN5090A).
Auto Wall-Mount
button.
button. The position is initialized to the default
button to save.
button.
English - 126
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
External Settings
Melody : Medium
Wall-Mount Adjustment
Move Enter
Wall-Mount Adjusment
Position 1 2
Adjust Save
INFO
Save
Select a mode to Save.
Position1
Position2
Position
Move Enter Return
Wall-Mount Adjusment
Position1
Position 1 2
Adjust Save
INFO
►
Return

Center

Center