Setting The Thermometer; Selecting The Temperature Unit - Waeco AirConService TM-84N Notice D'utilisation

TM-84N AirConService
7

Setting the thermometer

7.1

Selecting the temperature unit

➤ Press the
°C/°F
Note the following diagrams for this:
°C
7.2 Setting the thermal element type
To measure the temperature correctly you first need to set the type of thermal element
required:
➤ Press the
TYPE
Note the following diagrams for this:
K
TYPE
TYPE
The set type of thermal element is saved even when the device is switched off.
7.3 Activating the automatic switch-off
The LCD thermometer switches off automatically if it is not used for 15 minutes.
➤ Press the
HOLD
EN
button to set the required temperature unit in °C, °F or K.
K
°F
button to select the thermal element type K or J
J
TYPE
TYPE
button to switch the function on or off.
Setting the thermometer
.
23