Description Of The Tool - Scell-it E-412NA Premium Série Guide Rapide

DESCRIPTION OF THE TOOL

1. BASIC CHARACTERISTICS
Lenght:
285 mm
Height:
270 mm
Width (over the aircoupling) :
Weight:
1,65 kg
Stroke:
7 mm
Stroke force at 0.6 MPa:
Air consumption:
1.5 L / stroke
Working pressure:
5 to 7 bars
Capacity:
RIVET NUTS M3 M4 M5
ALUMINIUM
STEEL
STAINLESS
STEEL
Intensive use Occasional use or small series
2. TOOL OPERATION
Description of the tool:
1 - Mandrel
2 - Anvil with counternut
3 - Quick interchangeable system
4 - Front nozzle
5 - Stroke set-up
6 - Revolvable air supply
7 - Unscrewing button
The manufacturer equipped the tool with a anvil and mandrel for rivet nuts M8. for riveting
of rivets with a different dimension it is necessary to exchange the anvil and mandrel and
change basic set up and regulation of the tool as following:
1. Loosen the counternut of the anvil
2. Screw out the anvil from the front nozzle
3. Screw out the mandrel from the sleeve
4. Choose appropriate anvil and mandrel, see the following chart:
Nuts Anvils and mandrels
Mandrel for rivet nuts M3
M3
Anvil for mandrel M3
Mandrel for rivet nuts M4
M4
Anvil for mandrel M4
Mandrel for rivet nuts M5
M5
Nez pour tirant M5
Mandrel for rivet nuts M6
M6
Anvil for mandrel M6
99 mm
18.5 kN
M6 M8 M10 M12
Spare part Nr.
E-TIGE-NA-03
E-NEZ-NA-03
E-TIGE-NA-04
E-NEZ-NA-04
E-TIGE-NA-05
E-NEZ-NA-05
E-TIGE-NA-06
E-NEZ-NA-06
2 4
1 3 5
FIGURE 1
Nuts Anvils and mandrels
Mandrel for rivet nuts M8
M8
Anvil for mandrel M8
Mandrel for rivet nuts M10
M10
Anvil for mandrel M10
Mandrel for rivet nuts M12
M12
Anvil for mandrel M12
ANVIL/MANDREL M4 TO M10 INCLUDED
ANVIL/MANDREL M3 AND M12 TO ORDER
7
6
Spare part Nr.
E-TIGE-NA-08
E-NEZ-NA-08
E-TIGE-NA-10
E-NEZ-NA-10
E-TIGE-NA-12
E-NEZ-NA-12
• 3
E-412NA - User Manual
EN
FR
IT