König Electronic CMP-HOMEPLUG21 Mode D'emploi page 2

Installing the Homeplugs
Powerline Bridge
Step 1: Connect one power
adapter to your ADSL or
cable modem's Ethernet port
and plug the adapter into the
nearest mains socket
LED Definitions
LED
Mains power
Ethernet
POWER
* Standby mode: This mode is the energy saving mode that complies with EuP standards.
The homeplug will automatically enable standby mode when there is no
Ethernet activity.
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
problem should occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or
damage caused due to incorrect use of this product.
ENGLISH
Powerline
Bridge
Step 2: Plug in the second
mains power adapter next
to your PC and connect the
Ethernet ports
State
ON Mains power network activity.
OFF Search or no mains power network activity.
ON Ethernet connection is OK.
Flashing Data transfer.
OFF No link to Ethernet.
ON Power on.
ON Red light indicates standby mode*.
OFF Mains power off or failure.
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
2
Powerline Bridge
Step 3: You can now acces
the internet from any mains
socket in your home
Description