PROLUMIA PRO-FLOOD BASIC Manuel D'utilisation page 9

STANDARD INSTALLATION STEPS
Step 1:
Open the box and check your product.
In case of damage, contact your merchandiser.
Step 2:
Fasten the brackets on the wall/surface with stainless steel screws.
Step 3:
Adjust the floodlight to direct the light in desired direction before tightening the screws.
Step 4:
Be sure to connect the wires correctly.
Brown - Live, Blue - Null, Yellow/Green - Grounding.
Make sure that the strain relief is applied correctly, and that the connection is watertight.
Step 5:
Switch on the voltage and check to see that the floodlight works properly.
1
INSTALLATION POSITION STANDARD VERSION
The floodlight can be installed on wall, ceiling or on a horizontal surface.
2
www.prolumia.com
9