Setting the On/Off Timer
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
button.
Press the ▲ or ▼ button to select "Time", then press the ENTER
2.
Three different On/Off Timer Settings can be made. Press the ▲ or ▼
button to select "Timer 1", "Timer 2" or "Timer 3", then press the ENTER
button.
3.
Press the ◄ or ► button to select the desired item below.
Press the ▲ or ▼ button to adjust the setting.
•
On Time: Set the Hour, Minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you've chosen, set to "Activate".)
•
Off Time: Set the Hour, Minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you've chosen, set to "Activate".)
Volume: Set the required volume level.
•
•
Antenna: Select "Air" or "Cable".
•
Channel: Select the desired channel.
•
Repeat: Select "Once", "Everyday", "Mon~Fri", "Mon~Sat", "Sat~Sun",
or "Manual".
When "Manual" is selected, press the ► button to select the
➣
desired day of the week. Press the ENTER
desired day and the
Press the EXIT button to exit.
You can set the hour, minute and channel by pressing the number
➣
buttons on the remote control.
Auto Power Off
➣
When you set the timer On, the television will eventually turn off, if no
controls are operated for 3 hours after the TV was turned on by the
timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
button over the
mark will appear.
English - 48
Plug & Play
Language
Time
button.
V-Chip
Caption
External Settings
Entertainment
Energy Saving
PIP
SW Upgrade
Clock
Sleep Timer
Timer 1
Timer 2
Timer 3
Move
On Time
12
00
Off Time
12
00
Volume
Antenna
10
Air
Repeat
Sun Mon Tue Wed Thu Fri
Once
Move
: English
►
: Off
: Off
Time
: 12 : 00 am
: Off
: Inactivated
►
: Inactivated
: Inactivated
Enter
Return
Timer 1
am
Inactivate
am
Inactivate
Channel
3
Sat
Adjust
Enter
Return