Spdif Output; Setting The Time; Setup Menu; Using The Sleep Timer - Samsung 6 Serie Guide De L'utilisateur

Basic Features

sPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as a DVD player.
Audio Format : During the reception of a digital TV
■
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
Audio Delay : Correct audio-video mismatch, when
■
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
sound Reset
Reset all sound settings to the factory defaults.

Setup Menu

setting the Time

¦
O
m → setup → Time → EnTERE
MEnU
Time
✎
The current time will appear every time you press the
InFO button.
Clock : Setting the clock is for using various timer
■
features of the TV.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically.
– Auto : Set the current time automatically using the
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
– Manual : Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock set: Set the Month, Day, Year, hour, Minute
and am/pm.
✎
Available only when
Manual.
✎
You can set the month, day, year, hour and minute
directly by pressing the number buttons on the
remote control.
18
English
Clock Mode is set to
DsT (Daylight saving Time) (Off / On): Switches the
Daylight Saving Time function on or off.
✎
This function is only available when the
Mode is set to Auto.
Time Zone: Select your time zone.
✎
This function is only available when the
Mode is set to Auto.

Using the sleep Timer

¦
O
MEnU m → setup → Time → sleep Timer →
EnTERE
t
sleep Timer
■
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
✎
To cancel the sleep Timer, select
Off.

setting the On/Off Timer

¦
O
m → setup → Time → Timer 1 →
MEnU
EnTERE
Timer 1 / Timer 2 / Timer 3
■
timer settings can be made. You must set the clock first.
On Time
▲
Inactivate 12
▼
Off Time
Inactivate 12
Volume Source
10 TV
Repeat
Sun
Once
L Move U Adjust E Enter R Return
On Time / Off Time: Set the hour, minute, am/pm and
activate/inactivate. (To activate the timer with the setting
you have chosen, set to Activate.)
Volume: Set the desired volume level.
source: Select TV or UsB content to be played when
the TV is turned on automatically. (UsB can be selected
only when a USB device is connected to the TV)
Antenna (when the source is set to TV): Select Air or
Cable.
POWER
P Clock
Clock
: Automatically
FAV.CH
: Three different on / off
Timer 1
00 am
S.MODE
00 am
Antenna Channel
Air 3
Mon Tue Wed Thu Fri Sat
TOOLS
SLEEP