Outgoing Calls - Clatronic AR 736 Mode D'emploi

21. USB Connexion
This device has been developed in accordance with the
latest technical developments in the USB fi eld. Unfortunately
the large number of different types of USB storage media on
offer today makes it impossible to guarantee full compatibili-
ty with all USB storage media. For this reason there may be
problems in rare cases with playing back from USB storage
media. This is not a malfunction of the device.
1. Use the adapter cable to connect a USB storage medi-
um to the corresponding connection (The letters USB
HOST appear in the display). The data is played back
automatically.
2. In order to search for/select certain tracks proceed
as described under section 6 b) (B button as search
function in MP3 mode) and section 12-17 b).
22. LCD (liquid crystal display)
23. RESET Button (not shown)
With the control panel removed this button is to be found in
the bottom right-hand corner.
Due to voltage fl uctuations in your vehicle electrical system
it is possible that the control processor of your radio has
„hung up". This is not a fault in the device! Press this
button with a pointed object to restart it (reset).
Telephoning via Bluetooth
Bluetooth technology is a wireless radio connection between
devices over a short distance. Currently Bluetooth technology is
mainly used for the hands-free operation of mobile telephones.
This enables the driver to conduct a conversation via his or
her mobile telephone while driving without having to hold the
telephone to his or her ear.
This device provides you with the opportunity to use a Bluetooth-
capable mobile telephone. The working radius is restricted to
approximately 3 metres.
For Optimum Sound Quality during a Telephone Call
Do not set the volume too high. Otherwise there may be feed-
back (a whistling noise) from the loudspeakers.
Note: The setting of the volume depends on the installation
positions of the loudspeakers relative to the microphone and
cannot therefore be specifi ed in detail.
Registering Devices
Before you can telephone via the car radio the devices have to
be registered with one another.
1. Keep the DISP/MENU button (3) held down (PAIRING:1
appears in the display).
2. Press the multifunction button (2) to confi rm (The letters
PAIRING:1 >>>> appear in the display).
3. Register the car radio in your mobile telephone as described
in the operating instructions for your mobile telephone. The
device designation „BT60" appears as a choice in your
mobile telephone.
76
05-AR 736 CD_MP3_NEU 76
4. Now enter the password „1234" in your mobile telephone.
The car radio is now registered in your mobile telephone.
5. Once the registration has been successfully performed,
„PAIRING:1 " appears in the display of the car radio
together with the name of the mobile telephone.
Note:
• If registration was not successful, „PAIRING:1 X" appears in
the display of the car radio.
• Depending on the mobile telephone manufacturer, it is
necessary to carry out the registration (PAIRING) again in
order to register your mobile telephone in the car radio.
• Bluetooth compatibility cannot be guaranteed for mobile
telephones that come onto the market in the future.
• In order to guarantee an optimum connection, please ensu-
re that the battery of your mobile telephone is fully charged.
• Some makes of mobile telephone have an energy-saving
mode. Please deactivate the energy-saving mode, as you may
otherwise have problems when telephoning via Bluetooth.
• In order to be able to conduct an incoming or outgoing tele-
phone call Bluetooth has to remain activated in your mobile
telephone. Please consult the operating instructions for your
mobile telephone.
• Please ensure that you speak in the direction of the built-in
microphone. The connection of an external microphone is
not possible.

Outgoing Calls

1. Press the multifunction button (2) briefl y (The letters „ "
appear in the display).
2. In order to enter the desired telephone number, turn the
multifunction button until the appropriate fi rst digit appears.
Press the multifunction button (2) again briefl y in order to
confi rm the digit. Repeat the above steps for the following
digits until you have entered the entire telephone number
(which is shown in the display of the car radio).
Note: If you have entered one or more incorrect digits you
can delete the digits with the B /
3. In order to call the telephone number, keep the multifunction
button (2) pressed down until the word „CALLING >>>>"
appears in the display.
4. To terminate the call, please press the B /
Note: In order to call the telephone numbers you have entered
you can also press the M /
Redialling
The device stores the last nine numbers dialled. If you wish to
call any of these these, please proceed as follows:
1. Press the multifunction button (2) briefl y (The letters „ "
appear in the display).
2. Then keep the multifunction button (2) pressed down. The
last number dialled appears in the display.
3. By pressing the multifunction button (2) you can now select
from the last nine numbers dialled.
4. In order to call the selected number keep the multifunction
button (2) pressed down until the word „CALLING >>>>"
appears in the display.
CLEAR button (6).
CLEAR button (6).
TRANSFER button (5).
18.09.2006, 11:02:26 Uhr