Optimal Image Display; Photo Import Method; Display Current Time With Photos; Display Photo File Date/Time Stamp With Photos - HP df730v1 Manuel De L'utilisateur

3. Use
view is achieved.
4. Use
TIP: You can also adjust the brightness with the dial on the left side of the DPF.

Optimal Image Display

You can choose the desired display mode for displaying your photos on the DPF as follows:
1. On the HOME screen, press
2. Select Optimal Image Display, and then select the desired setting.
Original = Displays photos in actual photo size.
Optimal (default) = Optimizes the size and resolution to best fit the screen, which may result in part of
a photo not being visible on the screen.

Photo Import Method

When importing files into the internal memory from an external media source, the file can be optimized or
left as the original file size and resolution.
1. On the HOME screen, press
2. Select Photo Import Method, and then select the desired setting.
Optimized (default) = The photo file is downscaled in size and compressed into a smaller sized JPEG,
allowing more photos to be stored in the internal memory.
Original = The photo file is stored keeping its original size and resolution

Display Current Time with Photos

You can have the current time displayed with your photos if desired.
1. On the HOME screen, press
2. Select Slideshow Setup, and then select On or Off under 'Display Current Time'.
3. Select Done.
TIP: If the time is incorrect, refer to Set the Date and Time to set the clock (page 14).

Display Photo File Date/Time Stamp with Photos

Most digital cameras typically include a Date/Time stamp when saving photo files. If your photo files contain
this Date/Time information, you can have it displayed with your photos if desired.
1. On the HOME screen, press
2. Select Slideshow Setup, and then select On or Off under 'Display Photo Date/Time'.
3. Select Done.

Import Photos into Internal Memory

You can import your photo files from memory cards into the DPF's internal memory. The number of photo files
you can import depends on file size and available memory.
1. Insert your media source into the DPF. The memory card option screen will be displayed.
2. To import all photos, select Import All Photos.
To import individual photos, select Select Photos to Import.
to scroll through the LCD options, and use
to select Done.
to display the Setup Menu.
to display the Setup Menu.
to display the Setup Menu.
to display the Setup Menu.
10
to adjust the setting until the desired