Functioning Modes; Mode Selection - VALPES VT+ Manuel D'installation

EN

Functioning modes

Mode selection

Selection confirmation
Description
 Wireless local control (Bluetooth
mode requires a smartphone or a tablet with the
 Weekly scheduler (Bluetooth
actuator. This mode requires a smartphone or a tablet with the
 Wire control: electric control - permanent (on-off or 3-modulating point) or pulse.
 Positioning (learning mode) : this mode is needed for storing limit positions of the actuator.
 Positioning : allows the control of the actuator with a 0-10V or 4-20mA setpoint signal.
Functioning mode selection
The « Next Mode » button scrolls the functioning modes in the following order:
When the mode is selected, press « OK Mode » to confirm.
DSBA3600 • Rév. 05/11/2020
® ) : allows the use of the actuator from 20m maximum (in open field). This
X
A MART
® ) : thanks to AXMART ®
Bluetooth ® (local control)
↓
Bluetooth ® (schedule)
↓
Wire control
↓
Learning mode (positioning)
↓
positioning
Local control (Bluetooth
Weekly scheduler (Bluetooth
Wired (permanent & pulse signal)
Positioning (learning mode)
Positioning
Keyboard local control
® software.
, you can assign up to 20 repeatable tasks to each
X ® software.
A MART
® )
® )
(available soon)
25