SOLAR PORTABLE GARDEN SHOWER
EN
INSTRUCTIONS FOR USE AND INSTALLATION
Maintenance, winterizing:
Garden solar shower requires no special maintenance.
Keep the solar shower clean.
After the end of season, disconnect the solar shower completely from the water source. Overturn the shower and discharge thoroughly all the water
from the body through the shower head outlet; the lever faucet must be in "open" position between hot and cold. Following the discharge, a residual
amount of water (max 0.3 litres) will remain in the shower due to its design. This residual water no longer causes damage to the shower. During
storage, make sure the lever faucet and shower head remain dry; wrap them tightly to protect against penetrating moisture.
During the off-season, store the product in a dry place, protected from frost.
Transport and storage:
In order to prevent damage and loss of individual components, the original packaging should not be opened until immediately before assembly.
Basic parameters of solar showers:
Solar shower tank volume: 20 litres
Maximum allowable water pressure at the inlet of the valve: 6 bar
Body height: 2080 mm
Net weight: 5.3 kg
Bottom plate for anchoring: 4 holes ø 9 mm with 130x130 mm pitch
Warranty Conditions:
Assuming that all the conditions of use specifi ed by the manufacturer are met, the manufacturer provides a product warranty of 24 months from the
date of receipt of the product.
The Supplier is not liable for defects and damage caused by improper installation, improper use or improper winterizing procedure.
Service and spare parts are provided by the Seller through a network of stores.
Description of the shower set:
1 – Shower body
2 – Shower head
3 – Arm of the shower head
4 – Lever faucet
5 – Hose quick coupler