Pioneer XW-BTSP-W Mode D'emploi page 7

*1 Bluetooth pairing
1. Turn on the system power.
2. Press and hold (Pairing) button until "beep" sound, blue indicator would blink
quickly to wait for your Bluetooth device pairing.
3. Turn on your Bluetooth device (e.g. Smart Phone) setting, "XW-BTSP1" would be
shown at your device Bluetooth list.
4. Connect your device to "XW-BTSP1", "beep" sound and blue indicator would keep ON
when pairing success.
5. You can play your music through Bluetooth.
Note: When one Bluetooth device is connected and playing music, another Bluetooth
device can not be connected. Please disconnect the connected Bluetooth device.
*2 NFC pairing
NFC pairing can be done only with Bluetooth device (e.g. Smart Phone) that implements
NFC pairing function (Please refer your device manual).
1. Start application on Bluetooth device.
2. Touch Bluetooth device on
3. Keep touching until blue indicator ON.
4. Bluetooth pairing success.
When Bluetooth device 1 is connected and playing music, then Bluetooth device 2
connects with NFC => Bluetooth device 1 would be disconnected, and Bluetooth device 2
would be connected.
*3 Auto standby function
When AUDIO IN is not connected, after this system inactive 45 minutes, it automatically
turns to standby mode.
Please power switch turn to STANDBY then ON to return.
Note: This function is not active when battery charging or Bluetooth device is connected,
even without playing music.
mark.
7