18
INSTRUCTION FOR USE
Operating steps
1. Open the spray head.
2. Pour 200ml of tap water (drinkable according to regions/countries - max 250ml).
3. Pour 1gr of salt with the spoon provided.
5. Close the spray head. Shake 4~5 times to make the salt fully dissolved.
6. Lightly touch the power switch for 3 seconds and the blue light is on.
7. The bottle starts to work with a "beep" sound, the electrode starts to bubble (salt water in it) after
getting electricity. The working time is 3 minutes, when the work is done, the blue light switches off.
8. Don't press the switch during aquama
aquama
9. The system shuts down automatically after 3 minutes.
Best way to use
Use it directly when aquama
it is not recommended to keep it for a long time (standards not met).
Virucidal procedure:
For a virucide solution, put 2 spoons of salt (2gr) in 200ml of water and proceed to
4 activations. Reactivate the solution every day. This procedure guarantees the EN 13727,
EN 14476, EN 1276, EN 1650 and COVID19 (SRAS-CoV-2) EN 14476:2019-10 certification.
Light indication
• When the device is working, the blue LED light is on.
• When charging, the red light is on.
• When charging is completed, the green light is on. The device can be used normally.
Check battery status
• Batteries have no electricity: blue LED lights are not bright, indicating that batteries have no electricity.
• Low capacity battery: In the process of aquama
lights are on or the red light flashes, it means that the aquama
is low. When the power is less than 25%, it indicates that the device needs to be charged in time.
Cleaning
• The bottle body can be removed and washed directly with clean water.
• Wash regularly with vinegar as soon as a film appears on the membrane.
Indigo
solution disinfection water.
®
©
Indigo
®
©
Indigo
solution producing to avoid affecting the quality of
®
©
solution disinfection water producing is stopped (the light is off),
Indigo
solution disinfectant production, if the red
®
©
www.aquama.com
Indigo
solution generator battery
®
©