Typical Installation - Watts IntelliFlow A2C-M1 Mode D'emploi

Accessories: Watts A2-IntelliTimer
The Watts A2-IntelliTimer is an optional accessory used in con-
junction with the Watts IntelliFlow
Shutoff Valve. It is a remote timer which allows the IntelliFlow
be used in applications where the washing machine or a combi-
nation washer/dryer is 240VAC powered. (The IntelliFlow
compatible with 240VAC powered appliances). The timer initi-
ates a two-hour cycle when the button is depressed.
The A2-IntelliTimer low voltage power supply is plugged into
the IntelliFlow ® power outlet. The remote solid-state timer is
installed in a location that is convenient to the user and con-
nected to the low voltage power supply.
Activation of the push button on the timer causes current flow,
which is detected by the IntelliFlow
ates the solenoid valves, allowing water to flow to the washing
machine. This also begins a timing sequence of two hours,
which, upon its completion de-energizes the IntelliFlow
ting off the flow of water to the washing machine. The timing
sequence can be interrupted by activating the push button a
second time.
A Green LED is illuminated whenever the A2-IntelliTimer is ener-
gized.

Typical Installation

IntelliFlow
Low Voltage
Power Supply
Washer Hoses
Automatic Washing Machine
®
® is not
® . The IntelliFlow ® then actu-
, shut-
®
Power to
Washing
Power to
® Machine
IntelliFlow
®
Wall Box
120 240
VAC
VAC
Washing
Machine
to
®
IntelliFlow
®
IntelliFlow
Power Outlet
6
IntelliTimer
Power Lamp
Power Jack
Push On
Push Off
Low Voltage
Power Supply
Power Cord
®