Start-Up Of The Device / Introduction; General Operation - Clatronic CTC BSS 7002 Mode D'emploi

Start-Up of the Device / Introduction

• Choose a suitable location for the device. Suitable would
be a dry, level, non­slip surface.
CAUTION:
Do not carry the device by the control knob!
• Sensitive surfaces may be protected by plastic foil.
Remove this foil.
Power Supply
1. Make sure the grid voltage corresponds to the figures on
the rating plate.
2. Insert the grid plug into a properly installed three prong
socket.
3. Connect the device with the plug connector by inserting
its plug into the "DC 12 V
CAUTION:
• Only use the supplied power adaptor for this device. Do
not use for other devices.
• Only use power adaptor with 12 V (
adaptors may cause damage to the device.
NOTE:
Disconnect from mains power supply during longer periods
of non­use.
USB Charging Socket
You can charge your smartphone through this jack. Use the
USB cable of your smartphone for the connection.
NOTE:
• Due to the different smartphone types that are offered
today, and their different charging capacities, the loading
duration is dependent on the smartphone used and its
operating condition.
• Due to the design only a power supply of 1 A can be
ensured. Devices such as tablets PCs that need charg­
ing currents of up to 2500 mA, cannot be charged.
• A playback of audio-files through this connector is not
possible.
App Information
You can also download the appropriate app to this device on
your smartphone or tablet PC. The app gives you additional
control options (amongst others, 3 alarm times and a sleep
timer).
The iLink app is available for android and iOS. Scan the
corresponding QR code to go directly to the download.
NOTE:
Depending on the provider, downloading the app may
require payment.
BSS7002_IM_CTC_neu
" jack of the device.
), other
Google Play
Important Note for Operation via App
Once you are connected as described in the chapter "Playing
Back Music Files" "Wireless via Bluetooth" you must
connect the app with the device.
1. Open the app.
2. Click on the icon menu (1).
3. Select the menu item for the
Bluetooth connection (2).
4. Should the device not appear
in the list, click the search
icon .
5. Connect the app with the
device by clicking on "BSS
7002".
6. Now you can operate the device using the app.

General Operation

The operation described in this manual refers to the handling
on the device.
Switching the Device On / Off
• Press and hold the button for about 3 seconds to turn
the device on.
• To turn the device off, press and hold the
for about 3 seconds.
Indicator Lamp (2)
The indicator lamp changes its colour according to the
operating mode.
Colour of the indicator lamp Operating mode
Flashes blue
Lit blue
Lit red
Change Colour of Light Mood
You have the possibility to choose between 6 different colour
variants and an automatic colour change.
1. Switch on the device.
2. Repeatedly press and release the control knob to select
the desired colour.
NOTE:
With the 7th colour selection, the illumination automati­
cally changes between the 6 colour variations.
App Store
button again
In Bluetooth pairing mode
Bluetooth connection
exists
In AUX­IN mode
31
25.04.17