Maintenance Advice - nania I-MAX SP PLUS Guide D'utilisation

guide (26).
CAUTION: Before each journey, check that the armrests are lowered. Secure your
car seat with the vehicle seat belt at all times, even when your child is not in the car
seat. An unsecured car seat can cause injuries in the event of a collision.
Returning to the original configuration of the car seat
Follow the instructions below if you wish to return to the harness configuration.
Pull the harness buckle through the crotch slot of the cover (27). Via the front of
the backrest, between the cover and the shell, grasp and twist the metal anchor of
one of the two upper sections of the harness, simultaneously pulling the section
through from the back (28). Thread the harness section through the side openings
of the shell and cover and re-install it via the front of the backrest at the desired
height (29). Check that the metal anchor of the harness section is correctly posi-
tioned behind the backrest (30). Repeat the operation with the second harness
section. Check the harness is not twisted.
Storage of the instruction manual
Store this instruction manual, depending on the model of your vehicle, either in
the pouch provided, or by slipping it into between the shell and the cover of the
seat (31).

Maintenance advice

All the material parts can be removed. Slight stains can be removed using a damp
sponge soaked in soapy water or it can be washed by hand at 30° in soapy water.
Do not use bleach, do not iron, do not machine wash, and do not tumble dry.
WARNING
• This car seat is a "Universal" child restraint system. It has been approved in ac-
cordance with regulation N°44/04, and is suitable for general use in vehicles and
is compatible with the majority (some exceptions) of vehicle seats.
• It is more likely that the seat is perfectly compatible if the vehicle manufacturer
states that its vehicles are suitable for taking "Universal" child restraint systems.
• This restraint system is classified as "Universal" in accordance with the strictest
approval criteria, whereas earlier models do not correspond to these new provi-
sions.
• It can only be adapted to vehicles with 3-point safety belts that are either fixed
or have a roller mechanism and that have been approved compliant with the UN/
ECE N° 16 or other equivalent standards.
• If in doubt, contact the manufacturer or retailer of the restraint system.
17
User guide - GB
GB