Panasonic SH-WL30 Mode D'emploi page 5

2
Open the app and follow the on-screen
instructions.
Follow the app's instructions to connect to your ALL speaker.
The procedure splits into the paths described below along the way.
∫ Path 1: When the SH-WL30 is detected
(a screen similar the one below appears)
1 Select "Add".
2 Scan the QR code on the bottom side of this unit.
Scan the QR code for either 5 GHz (recommended) or
2.4 GHz, depending on your environment. (l right)
∫ Path 2: When the SH-WL30 is not detected automatically
(a screen similar the one below appears)
1 Go to Wi-Fi settings on your smartphone or tablet.
2 Select "AllPlay
3 Type a device name.
4 Change the network name (SSID) to "SH-WL30-5G-
" or "SH-WL30-2G-
the password (Key) for this unit (refer to the
bottom side of the unit).
* This can sometimes take 1 minute to appear.
_AJ".*
"and type
3
After a short
wait ...you're
connected!
Configure the connection of the
ALL speaker to be added to the
wireless network.
For details, refer to the
Operating Instructions for the
ALL speaker.
≥ In case you are not connected
automatically,
please re-select your Wi-Fi network
from the settings / Wi-Fi settings
menu on your device.
Further Support
For more information and other
network setting methods, refer
to the Operating Instructions
<Full version>.
If you require further help,
please visit
http://panasonic.jp/support/
global/cs/audio/
(This site is in English only.)
∫ Characteristics of radio
wave frequency bands
5 GHz frequency band
≥ Normally not used by devices other
than routers. As a result, it provides
very reliable connections and stable
performance.
≥ Offers faster communication speeds
than the 2.4 GHz band.
≥ More sensitive to obstacles such as
walls and floors than the 2.4 GHz
band. Radio waves become weaker
over longer communication
distances.
≥ Older Wi-Fi devices may not support
the 5 GHz band.
2.4 GHz frequency band
≥ Offers superior penetration of
obstacles such as walls and floors,
allowing radio waves to travel longer
distances.
≥ Supported by most Wi-Fi devices
≥ Prone to congestion and unstable
performance because it is used by a
wide variety of products. (In an
apartment or condominium building,
for example, you may also
experience radio wave interference
from devices in other rooms.)
5
SQT1348