Publicité
Les langues disponibles
Les langues disponibles
Face & Fingerprint Recognition Terminal
●
Insert the supplied power adapter to its socket at the back of the
device；
●
Insert RJ45 cable into its socket also located at the back of the
device；
● Wall mounting: The mounting bracket shall be installed with the top
two screws 1.15m above ground, please ensure the back of the mount-
ing bracket is flush against the wall
●
With the mounting bracket installed, slide the device gently into
place making sure the two flaps at the top of the bracket is aligned with
the device's slots and that the bottom of the device cover the screw
hole at the bottom of the mounting frame, then secure the device to
the mounting bracket with the supplied screw
●
The device defaults with no managers enrolled, please register a
manager or administrator level user.
Chapter 3. User registration and delete
To provide anti-tamper protection, we recommend registering a
manager or administrator as the first user
● If no advanced users are registered on the device , press the"
"
icon on the top left corner of the display to begin enrollment
● If there is a registered manager/administrator, said advanced users
must pass authentication after pressing the "
"icon to gain access to
its menu
● If the machine is set up with an administrator level user, managers
would no longer be able to access the advanced settings and commu-
nication settings menu
A. Enroll
● "
"icon → User → Enroll
3
Publicité
