PNI Face 600 Manuel Utilisateur page 23

E. Calibrate Sensor:
● " "icon → Setting → Advanced → Calibrate Sensor
F. Upgrade Firmware:
*Insert USB flash drive with the firmware loaded into it before
using this function
● " "icon → Setting → Advanced → Upgrade Firmware
G. Factory Reset
*It is highly recommended that you backup all data (Chapter 11
USB Disk) before you perform the factory reset
● " "icon → Setting → Advanced → Factory Reset
H. Clear All Time Log:
● " "icon → Setting → Advanced → Clear All Time Log
I. Clear All Management Log:
● " "icon → Setting → Advanced → Calibrate Sensor
J. Clear All User Database:
*Delete all users
● " "icon → Setting → Advanced → Clear All User Database
K. Clear Photo:
● " "icon → Setting → Advanced → Clear Photo
Face & Fingerprint Recognition Terminal
23