AmazonBasics B073DC3282 Mode D'emploi page 11

Operation
I. Making a bag with a bag roll
1. Use scissors to cut a bag from the bag roll to the needed length.
2. Put one end of the bag on top of the sealing element, without reaching the vacuum chamber
(Fig. 1).
3. Close the cover and press tightly till you hear it click into place on both sides (Fig. 2).
Fig. 1
4. Press Seal button to start sealing a bag (Fig. 3). The seal indicator turns blue.
5. After sealing has been completed press the release buttons to open the cover (Fig. 4) and take
the bag out of the appliance. The bag is ready for vacuum sealing.
Fig. 3
NOTICE
Fig. 2
Fig. 4
The appliance does not start sealing again within 15 seconds of the
last cycle.
11