Functional Testing - Carbest 80248 GasCube Notice D'utilisation

UK

FUNCTIONAL TESTING

1. Turn on the GasCube, await the self­test until the blue
LED lights up constantly and the GasCube is ready to
use.
2. Then hold a gas lighter at the GasCube's side openings,
press the button of the lighter so that gas exhausts, but
no flame will be produced.
3. After a few seconds, the pre­alarm is triggered. If you
now continue to let the gas flow into the housing, after
the pre­alarm an alarm is triggered.
Technical details:
Button
Sensitivity
Voltage
Conformity
Power consumption at stand-by
Connecting cable
Power consumption at alarm
Dimensions in mm
Sound volume alarm
ON/OFF
approx. 95 ppm EEC
10 – 15 VDC
89/336EEC, 93/68EEC
100 mA
red = +, black = –
180 mA
55 x 87 x 24
approx. 80 dB