Switching Off - tomado THP0402G Mode D'emploi

Switching on
Press the ON/OFF button
To set the required heating position, press the + button. To lower the required heating position, press the - button.
Setting the heating position
Position 1: minimum heating - suitable for long-term use
Positions 2-5: separately adjustable heating
Position 6: maximum heating
ATTENTION
The heating pad heats up the fastest when you first switch on a higher temperature position.
ATTENTION
The heating pad has been provided with turbo heating, which ensures quick heating within the first 10 minutes.
WARNING:
If the heating pad is used for several hours, we recommend
setting the lowest heating position (position 1) to prevent the
user's body part to be heated from overheating and prevent
possible potential burns to the skin or heat stroke.
Automatic deactivation function
This heating pad has been provided with an automatic deactivation function. This means that the supply of heat is stopped
approx. 30, 60 or 90 minutes after the heating pad was activated. Repeatedly press the TIMER button
deactivation at the required time - 30, 60 or 90 minutes.
Once the set time has expired, the heating pad is switched off. The display is off.
To be able to use the heating pad again, the ON/OFF button
Select the required heating position and deactivation time.

Switching off

Press the ON/OFF button
ATTENTION
If the heating pad is not used for a number of days, you must switch it off with the ON/OFF button
the plug from the socket. Then disconnect the control from the heating pad by removing the plug.
to switch on the heating pad. The display switches on - position 1 - deactivation time 90 minutes.
to switch off the heating pad. The display no longer lights up.
should be pressed first in order to switch on the heating pad.
EN - 19
to set the automatic
and remove