Replacing The Scrapers; Conveyor Belts - Duplex 280i AC Manuel D'utilisation

7.3

Replacing the scrapers

Keep the two recovery tank scrapers (11) clean at all times.
Replace them approximately every 150 work hours or when they are visibly worn.
To replace the scrapers 11, proceed as follows:
1) Remove the cover 4.
2) Remove the recovery tank 5.
3) Unscrew the screws 12 and remove the worn scrapers 11.
4) Replace the scrapers 4 and tighten the screws.
7.4

Conveyor belts

The conveyor belts 13 have an unlimited lifespan.
CAUTION
Do not use the appliance to collect sharp object that could cut
through the rubber.
To always keep the belts 13 efficient, we recommend cleaning them periodically and
lubricating them using silicone spray.
4
Rev.
1.1
13
13
125
11
12
5
DUPLEX 280i
MAINTENANCE
11
12
F.25