HAEGER Saturn 22.2V Mode D'emploi page 7

If need to remove the battery pack, hold the main body, press the
-
release knob and remove the battery pack.
2. Assembling the aluminum tube
Fit the tube onto the main body's air inlet until it clicks into the position.
-
If need to remove the tube, hold the main body, press the release knob
-
and remove the tube.
3. Assembling the electrical floor brush
Fit the electrical floor brush on the tube until it clicks into the position.
-
If need to remove the electrical floor brush, hold the aluminum tube,
-
press the floor brush release knob and remove the brush from the tube.
4. Assembling the 2 in 1 brush & flat brush
Instructions for use
English
5