Control Panel - Bartscher 700.881F Mode D'emploi

Installation
Note: If the unit has not been stored or moved in an upright position, let it stand upright
for approximately 12 hours before operation. If in doubt allow to stand.
Remove the appliance from the packaging and the protective film from all surfaces.
1.
Avoid positioning the appliance in direct sunlight or damp areas.
2.
Insert the slide-out shelf/shelves at the desired levels
3.
If necessary, adjust the screw feet of the appliance to make it level.
4.
Note: Before using the appliance for the first time, clean the shelves and interior with
soapy water.
Operation

Control Panel

The control panel is located below the doors on the front of the
appliance.
Turn On
Close the door of the appliance.
1.
Connect the appliance to a mains power supply..
2.
Note: The Cooling Light is illuminated when the appliance is chilling the interior cabinet.
Defrost Light Cooling Light
UK