König SAS-DUMMYCAM90 Mode D'emploi page 2

Introduction:
This CCTV dummy camera is equipped with IR LEDs and has a professional design to give
the impression of real security camera. The IR LEDs are active and light up in the dark. With
sufficient lighting the solar panel can charge rechargeable batteries (not incl.).
• We recommend that you read this manual before installing/using this product.
• Keep this manual in a safe place for future reference.
Packaging contents:
• CCTV dummy camera
• Mounting screws and plugs
• Manual
Specifications:
• Housing:
• IP protection:
• Battery:
• Dimensions:
• Weight:
Insert the batteries:
1. Open the battery compartment at the backside of
the camera by turning the battery compartment
cover anticlockwise.
2. Place 2 AAA 1.5 V batteries (or AAA NiMH batteries)
into the battery compartment according to the
polarity markings (+ and -).
Replace the battery compartment cover after
placing the batteries by turning it clockwise.
Note: The light intensity needs to reach about 50 (lux) to charge NiMH batteries. When using
normal batteries, the charging function will not work.
plastic
IP44
2x AAA 1.5 V (not incl.)
180 x 83 x 78 mm (bracket not incl.)
290 g (batteries not incl.)
2
ENGLISH