Working Instructions; Emergency Procedure - Güde GEKZ 300 Traduction Du Mode D'emploi D'origine

ENGLISH
14

Working Instructions

• Do not lift the load in one go. After lifting the load
(chain tensioned), test the brake function approx.
10 cm above the floor by lifting and lowering the
load.
• Avoid excessive inching (e.g. giving short pulses
to the motor).
• Never drag the load over the floor.
• Loads to be lifted may only be hoisted vertically!
Never hoist or pull diagonally!
• Ensure that the chain never has any knots.
• Never lift the load with 2 chain hoists.
• Never swing the load to move the load outside
the axis of the chain hoist.
• Never secure the load on the tip of the karabiner.
• Never lift loads that are hooked on outside the
priority axis.
• Never wrap the chain around the load to be lifted.
• The mechanical gear brake holds the weight of
the load even after the system has been switched
off or in the event of a power outage.
Requirements for operating staff
The appliance may only be operated and maintained
by persons familiarised with it and informed about
possible risks.
Qualification: Apart from the detailed instructions
by a professional, no special qualification is necessa-
ry for appliance using.
Minimum age: Persons over 16 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training: Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
Warning! / Caution!
The device may only be connected to a
230 V socket with RCD!
230 VAC
230 V + RCD
Keep bystanders out the dangerous area
(5 m).
Read the operating instructions to reduce
the risk of injury.
Wear eye protective goggles !
Wear safety shoes with steel reinforce-
ment.
Wear gloves!
Keep your hands in safe distance.
Keep dry at all times.
Never expose tool to rain.
Cable pulling / transport prohibited
Ensure that there are no persons or ani-
mals under the load!
People or animals must not be transpor-
ted.
TÜV / GS conformity mark
CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Class III tool.