Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The photoelectric wireless online smoke alarm KD-101LF can be interconnected as a system. Its
communication is very easy just through a LERN-IN button. In a learnable wireless online smoke alarm
system others will sound together if one smoke alarm detects the smoke and sounds. In this way the
alarm is set off.
The product is used in family homes and non-smoking areas.
• TESTING
1.
Insert 9V battery and 3 x 1.5V battery (according to Figure).
2.
The RED alarm LED will flash about every 40s in working condition (see Figure).
3.
Press the TEST button for several seconds, the Red alarm LED and the LEARN-IN (red and green)
LED will flash, then the smoke alarm sounds. It shows that the smoke alarm is in working condition
(see Figure).
9V battery
• LEARN-IN
SET the MAIN detector/Assistant detector
1.
After TESTING, please LEARN-IN the wireless online smoke alarms into a system. Press the
LEARN-IN button each time, the LEARN-IN LED changes in from red to green.
2.
MAIN Detector: ensure the LED (main detector) of the LEARN-IN button is GREEN.
3.
ASSISTANT Detector: ensure that the LED of the others (assistant detectors) are RED.
4.
LEARN-IN Operation: Press the test button of the MAIN detector for several seconds in order to send
out the signal to the assistant detectors; in this case the RED alarm LED flashes and the detector
sounds, while the assistant detectors receive the signal and sound together. Then press the test
button on each assistant detector for several seconds in order to send out the signal to the MAIN
detector. The MAIN detector receives the signal and sounds the alarm.
• INSTALLATION
1.
Use supplied screws to install the smoke alarm according to the Figures below.
2.
Use the two screws (supplied) to fix the mounting plate at the ceiling.
3.
Adjust the hook of the mounting plate with the hole of the detector and turn counter-clockwise.
9V battery
installation
1.5V battery
installation
ENGLISH
Alarm LED
(Red)
1.5V x 3
battery
Hole
Hole
2
Horn
Test button
Screw
hole
Hook
Screw hole
LEARN-IN LED
(Red or Green)
LEARN-IN
button
Hook
Publicité
Table des Matières
