Getting Started - Hama TS38G Mode D'emploi

Warning – Batteries
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or allow them to enter
the environment. They can contain toxic, environmentally harmful
heavy metals.
• Immediately remove and dispose of dead batteries from the
product.
• Avoid storing, charging or using the device in extreme temperatures
and extremely low atmospheric pressure (for example, at high
altitudes).

4. Getting started

• Open the battery compartment (4) and insert two AA batteries with
the correct polarity.
• The battery compartment additionally contains the channel switch (3),
which allows you to switch between the channels CH1, CH2 and CH3.
Set the channel switch to the desired channel.
• Then close the battery compartment cover.
Replacing the batteries
• Open the battery compartment (4), remove and properly dispose of
the dead batteries and insert two new AA batteries with the correct
polarity. Then close the battery compartment cover.
Note
Before use, make sure that you insert the batteries in the measuring
station rst and then in the base station.
4