Purpose Of Use; Work Area Safety - Beta 1838UV Mode D'emploi

OPERATING INSTRUCTIONS
OPERATING MANUAL AND INSTRUCTIONS FOR THE UV LAMP MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN.
CAUTION
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE ULTRAVIOLET LAMP. FAILURE TO COMPLY
WITH THE SAFETY STANDARDS AND OPERATING PROCEDURES MAY RESULT IN SERIOUS INJURY.
Store the safety instructions with care and hand them over to the users.

PURPOSE OF USE

The ultraviolet lamp can be used for the following purposes:
• detecting leaks by using a contrast medium sensitive to UV rays.
The ultraviolet lamp must not be used for the following operations:
• must not be used on people or animals or for medical purposes
• must not come into contact with chemical and corrosive substances
• must not be used for any applications other than recommend ones.

WORK AREA SAFETY

Do not operate the lamp in environments containing potentially explosive atmospheres, because sparks may be generated,
which can ignite the dust or fumes.
Keep children and bystanders away from the UV lamp.
'R QRW XVH WKH ODPS QHDU ÀDPPDEOH PDWHULDO
UV LAMP SAFETY
Before use, check that the lamp has not been damaged, and that no parts are worn.
Do not force the electronic circuit of the lamp.
PERSONNEL SAFETY
6WD\ DOHUW ZDWFK ZKDW \RX DUH GRLQJ 'R QRW XVH WKH 89 ODPS ZKLOH WLUHG RU XQGHU WKH LQÀXHQFH RI GUXJV DOFRKRO RU
medication.
Always use the following personal protective equipment:
• UV eye protection.
Do not direct the UV light beam at people or animals: this may cause temporary blinding.
EN