Important; Safety Information - Matrix EGV 2500-3 Traduction De La Notice Originale

Important!

When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with
due care. Keep this manual in a safe place, so that
the information is available at all times. If you
give the equipment to any other person, give
them these operating instructions as well.
We accept no liability for damage or accidents
which arise due to non-observance of these
instructions and the safety information.

1. Safety information

CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety
regulations and instructions may result in an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions in
a safe place for future use.
General instructions
• Read the complete operating manual with due
care. Acquaint yourself with the controls and
how to use the tool.
• All persons (including children) who, for reasons
of physical, sensory or mental ability or
inexperience or lack of knowledge, are not in a
position to be able to use this device safely,
should not use the device unsupervised or
without instruction by or from a responsible
person.
Children must always be supervised in order to
ensure that they do not play with the device.
• Never allow children to use the tool.
• Never allow other persons who are not familiar
with the operating instructions to use the tool.
Contact your local government offices for
10
information regarding minimum age
requirements for operating the tool.
• Never use the tool when there are people –
particularly children – or pets nearby.
• The user is responsible for any accidents or
hazards suffered by third parties or their
property.
Preparation
• Always wear sturdy footwear and long trousers
when using the tool.
• Never wear loose fitting clothes or jewelry. They
may get drawn into the suction opening. Rubber
gloves and non-slip shoes are recommended
when working outdoors. Wear a hair net if you
have long hair.
• Wear safety goggles while you work.
• Use a dust mask when working on dusty jobs
• Always check the tool, the power cable and the
extension cable before using the tool. Only
operate the tool when it is in good working order
and is not damaged in any way. Damaged parts
have to be replaced immediately by a qualified
electrician.
• Never use the tool if any of its safety devices or
guards are damaged or if any safety
attachments such as deflectors and/or grass
catching devices are missing.
• When working outdoors, use only extension
cables which are approved for outdoor use.
Extension cables must have a minimum
2
crosssection of 1.5 mm . The plug connections
must be splash-proof.
Operation
• Always trail the power cable behind the tool.