Door Alignment - GE Côte à côte 20 Manuel D'utilisation

DOOR ALIGNMENT

After leveling, make sure that doors are even at the top.
To make the doors even, adjust the refrigerator door.
Using a 5/16" socket wrench, turn the door adjusting
screw to the right to raise the door, to the left to lower
it. (A nylon plug, embedded in the threads of the pin,
prevents the pin from turning unless a wrench is
used.)
After one or two turns of the wrench, open and close
the refrigerator compartment door and check the
alignment at the top of the doors.
To remove the base
grille, open the doors
and then pull the
grille straight out.
Installation Instructions
5/16" Socket
Wrench
Raise
15