Front Wheel; Rear Wheels - Petique All Terrain Pet Jogger Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Remove stroller from box. The stroller frame, front wheel and rear
wheels need to be installed prior to use.
WARNING:
ensure the safety of your pet. Failure to follow these instructions
could result in serious injury or death.

FRONT WHEEL

1) Push and hold the button on top of the front wheel post and insert the front
wheel assembly into the bottom of the front wheel post until the spring clip
clicks (Fig. 1).
NOTE: pull onto the wheel assembly to ensure that it is securely locked and
attached to the stroller.
2) REMOVE: To remove the front wheel, push
and hold the button on top of the front wheel
post and pull the wheel out (Fig. 2).

REAR WHEELS

3) On each side, push the rear wheel post into
the rear frame hub until the spring clip clicks
(Fig. 3).
NOTE: pull onto each rear wheel assembly
to ensure that it is securely attached to the
stroller.
Please follow all of these instructions to
Push
and Hold
Insert
Copyright © 2019, Petique, Inc., All Rights Reserved.
Parts
Fig. 1
Push
and Hold
Out
Fig. 2
Fig. 3
| 4 |

Publicité

Table des Matières
loading

Produits Connexes pour Petique All Terrain Pet Jogger

Table des Matières