Convenient Functions (Microphone Sensitivity Selector Switch Settings) - Toa WM-D5300 Série Mode D'emploi

9. COnVenient FUnCtiOns
Microphone sensitivity can be set to "0 dB" (H) or "−10 dB" (L).
notes
• Switch OFF the power switch when selecting the sensitivity.
• Avoid positioning the microphone too close to the mouth or speaking in a loud voice, as the sound
could become muddled and difficult to understand.
• Sensitivity is factory-preset to "L."
step 1. Confirm that the power switch has been switched off, then
remove the battery cover.
step 2. Using the supplied screwdriver, set the switch to the desired
sensitivity.
step 3. Replace the battery cover, as it was before.
16
(Microphone sensitivity selector switch settings)
1
2
Screwdriver
(accesory)
Microphone sensitivity
selector switch