Operation; Preparing Microphone - Toa WM-D5300 Série Mode D'emploi

7. OPeratiOn

7.1. Preparing Microphone

The following optional microphones can be used. Purchase one of them separately.
note
Be sure to switch OFF the transmitter's power switch before connecting or disconnecting the
microphone element. A loud noise may be produced if this is done with the power switched ON.
[YP-M5300 lavalier Microphone]
Clip
1.3 m in length
[YP-M5310 lavalier Microphone]
Clip
1.3 m in length
[WH-4000a Headset Microphone]
Plug lock
ø3.5 mm
* Windscreens are also available as optional product WH-4000S.
10
Plug lock
Set the Microphone's narrow
portion in the tie-clip's holder.
ø3.5 mm
Plug lock
ø3.5 mm
Adjustable band
Frame
Gooseneck Windscreen*
Microphone
Tie-clip attachment
ie-clip attachment
T
[WH-4000H Headset Microphone]
Plug lock
Rotatable
Frame
Gooseneck Windscreen*
ø3.5 mm Microphone