Grounding Instructions - Beam Electrolux Alliance Mode D'emploi

GROUNDING INSTRUCTIONS

This vacuum must be grounded (earthed). If it should malfunction or breakdown, grounding (earthing)
provides a path of least resistance for electric current to reduce the risk of electric shock. This vacuum is
equipped with a cord having an equipment-grounding conductor and grounding (earthing) plug. The plug
must be inserted into an appropriate outlet that is properly installed and grounded (earthed) in accordance
with all local codes and ordinances.
110/115/120V Models
This vacuum is for use on a nominal 110/115/120 volt circuit, and has a grounded plug like the one shown
below. Make sure the appliance is connected to an outlet having the same confi guration as the plug. No
adaptor should be used with this vacuum.
WARNING
Improper connections of the equipment-grounding (earthing) conductor can result in risk of electric shock.
Check with qualifi ed electrician or service person if you are in doubt as to whether the outlet is properly
grounded (earthed). Do not modify the plug provided with the appliance. If it will not fi t the outlet, have the
proper outlet installed by a qualifi ed electrician. This appliance is for use on a nominal 120 volt (see rating
plate for correct voltage) circuit and has a ground (earth) plug that looks like the plug illustrated Make sure
the appliance is connected to an outlet having the same confi guration as the plug.
• No adapter should be used with this appliance.
• Do not use an extension cord with this appliance.
• If the power cable is damaged, use only OEM replacement cable.
• Check the power unit on/off button and all inlet valves for operation.
• This power unit is intended for household and commercial use only.
4
Grounding Pin
Grounded Pin Receptacle
Grounded Outlet