Additional Information; Precautions; Fuse Replacement - Sony XDP-210EQ Mode D'emploi

Additional
Information

Precautions

•If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before switching on.
•If no power is being supplied to the unit,
check the connections first. If everything is in
order, check the fuse.
•For safety reasons, keep your car audio
volume moderate so that you can still hear
sounds outside your car.
•If you connect this unit to the XDP-U50D,
this unit will not work.
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.

Fuse replacement

If the fuse blows, check the power connection
and replace the fuse. If the fuse blows again
after replacement, there may be an internal
malfunction. In such a case, consult your
nearest Sony dealer.
Warning
When replacing the fuse, be sure to use one
matching the amperage stated above the fuse
holder. Never use a fuse with an amperage
rating exceeding the one supplied with the
unit as this could damage the unit.
Fuse (5 A)
EN
9