Hot Surface Indicator; Cooking Areas - Samsung NE58F9500SS Manuel D'utilisation

Location of the radiant surface elements and controls
The radiant control knobs operate the radiant surface elements on the cooktop as shown below.
2
1

Hot surface indicator

• Comes on when the unit is turned on or hot to the touch.
• Stays on even after the unit is turned off.
• Glows until the unit is cooled to approximately 150 °F.

Cooking areas

• The cooking areas on your range are identified by permanent circles on the glass cooking
surface. For the most efficient cooking, fit the pan size to the element size.
• Pans should not extend more than ½˝ to 1˝ beyond the cooking area.
• When a control is turned on, you can see a glow through the glass cooking surface. The
element will cycle on and off to maintain the preset heat setting, even at high settings.
• For more information on selecting proper types of cookware, refer to the section "Using the
proper cookware" on page 37.
When you operate the knob, beep sounds once. However, if you operate multiple knobs,
beep will sound once for the initially operated knob.
5
4
3
6
English - 34
1. Left Front: 6"/9", 3000 W
2. Left Rear: 6", 1200 W
3. Right Front: 9"/12", 3000 W
4. Right Rear: 6", 1200 W
5. Warming Center: 100 W
6. Hot surface indicator