Storage And Maintenance - Sunmer 103386 Manuel D'utilisation

Storage and Maintenance

• Please change the water after each use.
• Clean the product with clean water, then leave it in shady and cool
place for airing, fold it into its original package and place it
indoors ready for the next use.
• In winter, the pool should not be placed at a temperature that is
below 5°c, otherwise the plastic film will get damaged.
• Do not use alkali or acid detergents to clean the product.
• Do not leave the product under direct sunlight.
Repair Patch Instructions
Small pinhole and puncture leaks can be repaired with the included
repair patch.
1. Locate the place of the leak.
2. Deflate and drain the water.
3. Clean the area surrounding the leakage and wipe up all water
from the surface.
4. Take out the repair patch, cut it into the required shape and size
(which should be a little larger than the leaking area), put the
patch on the leaking area and press firmly.
5. You can use the pool again after 30 minutes of drying. If the
damage is larger than 1" (2.5cm), we recommend using a silicone
or rubber-based glue for repair.