Publicité
Les langues disponibles
Les langues disponibles
1.5 - BLACKOUT
In case of blackout, the appliance restarts to work in the previously selected conditions when power is
restored.
2 - INSTALLATION
2.1 - APPLIANCE TRANSPORT
• Transport and handling of the appliance must be carried out in vertical po-
sition.
If it is transported in a horizontal position, wait at least one hour before
starting it.
• Before moving or transporting the appliance, completely drain condensation
by working as described in paragraph 3.1.a
CAUTION
Transporting the appliance on delicate floors (for instance: wooden floors):
• Completely drain condensation.
• Pay particular attention while moving the appliance since the wheels may
mark the floor.
Although the wheels are made from a rigid material and are swivelling, they
could get damaged by use or excessive dirt.
It is recommended to check that the wheels are clean and that they can
move freely.
2.2 - WARNINGS
A failure to respect what follows may cause damages to the appliance.
a. Install the appliance on flat, stable and on floor level
surfaces.
b. Only connect the appliance to outlets equipped with a
ground system.
c. Make sure that curtains or other objects do not ob-
struct the air suction filters (Fig.5).
d. Make sure to keep a minimum distance of 20/30 cm
between the appliance and the adjacent objects (Fig.1).
e. The appliance must always be activated paying attention that there are no
obstacles for air suction and output.
f. The appliance must not be used in laundry rooms.
g. Only install the appliance in dry rooms.
h. The appliance must not be started in the presence of dangerous materials, va-
pours or liquids.
i. Clean the air filters at least once a week.
EN - 19
Publicité
Chapitres
