Packaging Contents; Use - Autonomous Mode; Safety - ccei BRIO ZX30 Notice Technique

Technical instructions

2. Packaging contents

1 BRIO ZX30 with
• Mounting accessory kit :
– Cap + seal int.
– IP68 + seal
– 4 stainless steel fixing brackets + screws
• 2x4mm² cable pre-equipped with terminal lugs for electrical connection
• Technical manual (this document)

3. Use - Autonomous mode

In the absence of a control unit, the bulbs operate autonomously and the user can choose between 18 modes:
11 colour sets and 7 programs (with shorts cutting power supply).
Change of mode and reset
• A small cut of power supply (less than 1s) switches to the next colour / sequence. Once all the colours are
displayed, the light goes back to the first colour (pure white).
• A cut of supply (2s) resets the light synchronization and switches them to the second colours (blue)
• After a long stop (more than 4s) the light show the last displayed colour.
Fixed colours and available sequences
The colours and sequences are displayed in a preassigned order:
• 1 to 11 : fixed colours. 1.Pure white | 2.Blue | 3.Blue Lagoon |4.Cyan | 5.Violet | 6.Magenta | 7.Pink |
8.Red | 9.Orange | 10.Green | 11.Sea green
• 12 to 18 : sequences. 12.Fast gradient | 13.Slow rainbow | 14.Colours parade | 15.Techno rhythm | 16.Blue
variations | 17.Random parade | 18. Ramdom colours

4. Safety

If the temperature inside the BRIO ZX30 is abnormally high, a safety device shuts off the lighting and pro-
duces a red flashing light. As soon as the normal temperature returns, the return to normal working order.
BRIO ZX30 v40ML
2