Eurotops 46952 Mode D'emploi page 15

M 8585 / M8586 / BF-A8585
. Untie the power cord and connect to power of 220V/50Hz.
·Press the Power Button ONCE, and the heating function is ON in a red indicator; the Intensity is low in a red indicator,
and the product is on Mode 1 in a red indicator.
·Press the Power Button ONCE, then press the Heating Button ONCE, and the heating function will be OFF as the red
indicator goes off.
·When the product is in operation, press the Intensity Button to switch between the two types of intensity. Red light
indicates Intensity choosen.
· When the product is in operation, press the Mode Button to switch between two Modes. Red light indicates the
Mode you have choosen.
D. TROUBLE-SHOOTING
This page summarizes the most common problems you could encounter with the product :
Problem
The product does
not work
Possible Cause
The product is not plugged in properly.
Power button not pushed
The product has just session and has
automatically switched to standby mode.
You may have used the product continuously
for 30 minutes or more where the over heat
protection has been activated.
An excessive load has been applied on the
product.
Suggestion
Ensure the voltage on the product
corresponds to the local mains voltage
and then plug in again.
Push the power button
If you want another session, press the
MODE button again.
Unplug the product and let it cool
down for 60 minutes before you use it
again.
Reduce the excessive load and start
again.