Technical Data - H+H UN 7 A Mode D'emploi

CONNECTION
Connect the mains plug with the mains.
If the connect device does not function, separate it from the mains
immediately.
Note! The output voltages of this mains adapter are not stabilised so that –
at zero or low load (e.g. with LCD computers) – the output voltage is higher
than the value set at the sliding switch (refer to Figure below). In this case,
set the switch one level lower to obtain the desired value
(e.g. from 12 to 9 V).
NOTES ON DISPOSAL
Old units, marked with the symbol as illustrated, may not be disposed of in
the household rubbish.
6
CARE AND WARRANTY
Separate the device from other components prior to cleaning, if necessary,
do not use aggressive cleansing agents.
The device has been subjected to a careful final inspection. In case of
complaints, however, please return the device together with the receipt. We
grant a guarantee period of 3 years from the date of purchase.
No claims will be accepted for damage due to wrong handling, improper use
or wear. We reserve the right for technical modifications.
Input: 230 V/50 Hz, 9 W
Output: 3; 4.5; 6; 7.5; 9;12 V DC can be switched
Output current: 300 mA at continuous load, max. 3.6 VA
For current product information please refer to our Internet Site
http://www.hartig-helling.de.

TECHNICAL DATA

7