Central Command; Operation - Becker Centronic VarioControl VC280-II Notice De Montage Et D'utilisation

Now press the programming button of the new master transmitter for 10
seconds.
▻ The LED on the radio socket flashes briefly twice to confirm.
► The new master transmitter has now been programmed and the old mas-
ter transmitter overwritten.
The Centronic multi-channel transmitters have a central command (all LEDs
light up). If all the channels of the transmitter are selected, it is possible to op-
erate all of the assigned receivers/groups simultaneously. The central com-
mand must be programmed separately in the remote-controlled socket so that
it can be executed.
Function
Pulse output is connected

Central command

Operation

Control button = UP-STOP-DOWN-
STOP
Transmitter up-button
tion
Transmitter stop button
STOP-DOWN-STOP
Transmitter down-button
function
Operation
= No func-
= UP-
= No
19 - en