Explanation Of Displays And Buttons; Assembly - Becker Centronic VarioControl VC280-II Notice De Montage Et D'utilisation

Explanation of displays and buttons

1. 2-core floating switching contact connecting cable for connecting to a
device's pulse input
2. UP-STOP-DOWN-STOP control button
3. LED
4. Programming button
1. Disconnect the consumer from the power supply (pull the mains plug).
2. Connect the 2-core floating switching contact connecting cable (pulse
output) to the pulse input provided for this purpose on the device to be
controlled.
3. Plug the radio socket into the 230 V mains socket nearest the consumer.
4. Now plug the consumer's mains plug into the radio socket.
The consumer is now ready for manual operation using the
radio socket's control button.
16 - en

Assembly

1
2
3
4