Transporting The Unit (Using The Cable Clip) - Sony PCGA-DDRW1 Mode D'emploi

If the disc does not eject
1
2

Transporting the unit (using the cable clip)

With the supplied cable clip, you can quickly and easily coil the VAIO
notebook peripheral cable (80 cm) or i.LINK cable into a neat loop for
transport as described below. When the drive is connected using the VAIO
notebook peripheral cable (80 cm), you only have to remove the connector
from the notebook. You can transport the drive with the cable attached.
Cable clip
GB
30
Confirm that the BUSY indicator is not flashing.
Detach the manual eject pin from the holder at the bottom of
the drive, and insert the pin in the manual eject hole.
The tray pops out and you can remove the disc.
Manual eject pin
Manual eject hole