Removing A Disc - Sony PCGA-DDRW1 Mode D'emploi

Removing a disc

z
Hint
The illustrations show the drive in a vertical position, but operation is the same when the
drive is positioned horizontally.
1
Verify that the BUSY indicator is not flashing and press the
eject button.
The tray pops out.
2
Pull the tray fully out until it stops. While supporting the tray
with your hand, remove the disc.
To release the disc, push on the hub in the center.
Notes
• Do not touch the lens assembly in the tray or the metal section on the rear.
• When using writing software or DVD playback software, you may not be able to
eject discs simply by pressing the eject button. For details, refer to Help or the
Quick Reference manual provided with the writing software or DVD playback
software.
Eject button
BUSY indicator
Disc
Hub
Continued on next page
GB
29