Safety Instructions - Walter Surface Technologies BIO-CIRCLE COMPACT-S 350 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety Instructions

bio-CirCle
®
applicable standards governing the manufacturing, performance and safety
of industrial products.
Warning: Before using this machine, read all safety and operating
instructions carefully and save this owner's manual for future reference.
When using this parts cleaning system, basic safety precautions should
always be observed to reduce the risk of fire, electric shock and personal
injury, including the following:
1.
Read this owner's manual to familiarize yourself with the unit's
operational guidelines, its particular features, applications and
limitations.
2.
Parts that are damaged or defective should be repaired or replaced.
3.
Adequate ventilation should be provided when operating the unit. Keep
work areas clean. A cluttered environment is prone to accidents.
4.
Keep children and other unqualified persons at a safe distance from
the work area. Do not let unqualified persons handle this machine.
Your bio-CirCle
5.
underneath the mesh basket in the sink. Always handle it with care,
as it will shatter if dropped and may cause injuries. Keep magnet
away from electronic devices and magnetic media such as floppy
discs, credit cards and computer monitors. Keep magnet away from
pacemakers and computers.
6.
Do not contaminate the cleaning solution with any flammable
or combustible substances such as gasoline, alcohol, mineral
spirits, solvents etc. Drain parts to be cleaned of any flammable or
combustible material before placing them into cleaning sink. Even
small quantities can create a fire hazard. Do not introduce into the unit
any cleaning solution other than those recommended such as
bio-Circle aero™, bio-Circle l™ and bio-Circle ultra™ as this will
cause malfunctions.
7.
The circulation pump & heater coil must always be immersed. Failure to
keep the solution at the proper level can result in a burned-out pump or
overheating heater coil thereby creating a potential fire hazard. To help
prevent this, the unit is equipped with a liquid level sensor and a high
temperature limit switch, which will shut off the pump and the heater
coil when the liquid level is low.
Caution: Used cleaning solution may be irritating to skin and eyes.
8.
While working, always wear appropriate gloves and approved safety
goggles.
4
Compact-S Model 350 - Parts Cleaning System
Parts Cleaning Systems are produced in accordance with
®
machine is equipped with a magnet inserted

Publicité

Table des Matières
loading

Table des Matières