Accessories; Getting Started - Unify Circuit Guide D'installation Rapide

Accessories

Circuit Meeting Room requires a web camera and a speaker phone.
products, such as Jabra Speak 410 speaker phone and Logitech C925e webcam, should be used.
For additional compatible products please visit
Circuit_Meeting_Room
G
Connectors and Buttons
Front panel of the FUJITSU ESPRIMO Q957
Rear panel of the FUJITSU ESPRIMO Q957
1
USB 3.0 connectors
2
Power button
3
Power cable connector
4a DisplayPort connector for primary
display

Getting Started

1 Connect the web camera
Plugin the USB cable of the
H
web camera
able USB connector
3 Connect the network cable
Connect a network cable to
the network connector
5 Connect the power cable
Connect the power cable
to the power cable connector
3
.
1 For a dual display configuration, connect the primary display to DisplayPort connector
2 For displays with HDMI connector(s), please use a DisplayPort to HDMI adapter or cable.
3 Check whether the local mains voltage corresponds with the indications on the label of the de-
vice, before plugging the other end of the power cable into a power outlet.
4
.
H
3
to an avail-
6
.
5 .
3
B
wiki.unify.com/wiki/
G
Speaker phone Jabra Speak 410,
packaged together with its Getting
Started, Warranty and Safety/ Regu-
lations documents
H
Web camera Logitech C925e, pack-
aged together with its Setup Guide,
and Important Information, Safety,
Regulatory and Warranty docu-
ments
1
2
4 5 6
4b
4a
4b
DisplayPort connector for second-
ary display
5
Network connector
6
USB 2.0 connectors
2 Connect the speaker phone
Plugin the USB cable of the
speaker phone
available USB connector
4 Connect the display
Connect the display to a Dis-
playPort connector
turn the display on.
6 Turn on your Circuit Meeting
Room
Press the power button
the Circuit Meeting Room.
Only compatible
1
G
to an
6
.
1
2
4 and
2
of
4a
.