Routine Cleaning And Maintenance; Regular Inspection And Maintenance - SOCO TC Manuel D'utilisation

MAINTENANCE
Regular maintenance can enhance the service life and driving safety of TC. Please refer to the following suggestions and take care of
your motorcycle.

ROUTINE CLEANING AND MAINTENANCE

Cleaning: Please use clean water and neutral detergent to clean it, and use soft cloths and sponges to clean the surface; it is prohibited
to use metal brushes, sandpaper or the like to clean it, in order not to scratch the parts surface. After cleaning, dry it with soft cloths.
Please disconnect the kill switch before cleaning.
Do not use strong water jet to directly wash it, so as to avoid the default of mechanical parts caused by water invasion.
Storage: try to park it in a dry and ventilated space to reduce the exposure to sun and rain, avoid rusty of parts.
In case don't use for long time, please turn off kill switch and disconnect the power supply, prevent over discharging.
After long-term storage, please fully charge it before use.

REGULAR INSPECTION AND MAINTENANCE

The new motorcycle must do the first inspection and maintenance in the SOCO Service Center when it reaches 1,000 km or two
months (whichever comes first).
The motorcycle is recommended to do a regular inspection and maintenance in the SOCO Service Center at every 3,000 km or six
months (whichever comes first).
All service and maintenance must operate by SOCO Service Center, use parts from manufacturer.
In case rider failed service and maintenance the motorcycle as requested, SOCO reserve rights refuse the warranty claims, if any.
In case rider open the vehicle without authorization, or using parts not from manufacturer, SOCO reserve rights refuse the warranty
claims, if any.
17